![]() Next to each pin is the primary label of what the pin does. The diagram above shows the top view where pins 1, 2 and 40 are printed next to the pins. When you program the Pico, you use the machine.Pin() but you always use the GP* number, never the pin number on the board pin numbers. You go down the left side and then continue up on the right side until you get to pin 40 in the upper right corner. The pin numbers are incremented as you go counterclockwise around the board. Raspberry Pi Pico’s 40 pins with pin 1 in the upper right corner with the USB connector at the top. * 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM The pinout diagram for the Raspberry Pi Pico is shown below. You can purchase USB Micro-B to USB-A or USB-C (Mac) cables on e-bay for under $2 or for $5 at Microcenter. The Raspberry Pi Pico uses a USB-micro connector.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |